HomeCostTotals
Waterproofing & Moisture cost calculator

Radon Mitigation Cost

For 1 system, the current national model estimates $1,791, with a planning range of $1,343 to $2,418. Adjust project size and quality, then enter a ZIP to apply a metro or state wage factor to labor only. Materials, labor, permits, disposal, data dates, and sources are shown separately.

Browse all waterproofing & moisture tools

Cost model uses the published 2026-07 index period.

Estimates are generated by a deterministic data pipeline and are not individually checked by a person before publication.

Project inputs

Project
Location
ZIP affects labor only. Blank uses the national average.
Advanced assumptions

Estimated project cost

Typical national cost
$1,791
$1,343 – $2,418
$1,791 per system
National baseline
$1,725
Public data adjustment
+3.8%
Local labor adjustment
+0.0%
Current estimate
$1,791

Construction costs+6.5% YoYUpdated July 2026

How is this adjusted?

HomeCostTotals applies current national construction inputs to the project baseline, then applies the ZIP wage multiplier to labor only. Public economic data indicates cost movement; it does not represent an exact contractor price. View the Renovation Cost Index.

Materials$694 · 39%
Labor$972 · 54%
Permits$100 · 6%
Disposal$25.00 · 1%
Semantic cost breakdown
ComponentDollarsShare
Materials$69438.8%
Labor$97254.3%
Permits$1005.6%
Disposal$25.001.4%

National labor multiplier: 1.000×. Enter a ZIP to match a metro or state wage factor.

Calculation record

Baseline date2026-01-01
Baseline provenancemodeled estimate, not directly sourced
Material indexWPUIP2300001 · 6.78%
Labor indexCES2000000003 · 2.29%
Data statusCost model uses the published 2026-07 index period.

material = baseline material rate × quantity × index change × quality
labor = baseline labor rate × quantity × index change × ZIP wage multiplier
subtotal = material + labor + permit + disposal

Sources used for this estimate

Every baseline number and its provenance

Numeric inputs used by the default model
InputPublished valueSource or derivation
Default quantity1 systemhct-default-scenario-v1
User-editable starting quantity selected for the static worked example.
Material base rate$650 / systemhct-legacy-baseline-v1
Locked base-period material input. Current material = input × quantity × verified material-index ratio × selected quality factor.
Labor base rate$950 / systemhct-legacy-baseline-v1
Locked base-period labor input. Current labor = input × quantity × verified labor-index ratio × regional wage multiplier × selected quality factor.
Permit allowance$100hct-legacy-baseline-v1
Locked national planning allowance added once; an applicable local fee schedule supersedes it.
Disposal base rate$25.00 / systemhct-legacy-baseline-v1
Locked base-period removal and disposal allowance multiplied by project quantity.
Low range factor0.75×hct-variance-model-v1
Disclosed low planning factor applied to the calculated subtotal.
High range factor1.35×hct-variance-model-v1
Disclosed high planning factor applied to the calculated subtotal.

The public datasets above support wage selection, index movement, and plausibility validation. They do not claim to publish each exact locked legacy baseline. Compare all public baseline records.

Index escalation tracks the direction of input costs, not a local market price. Actual quotes vary with labor availability, permit requirements, site conditions, and local competition. Read the full methodology.

Embed this calculator

Add this free calculator to another site. The visible attribution inside the calculator must remain intact.

What changes the price

  • Foundation type and footprint
  • Tested radon level and diagnostic findings
  • Suction-point count and pipe route
  • Fan capacity and discharge location
  • Electrical work, sealing, and post-installation testing

Scope boundary for this calculator

Use this calculator only after a valid radon test. The EPA recommends qualified mitigation work and post-installation testing. The model does not diagnose a radon problem or select a system; foundation type, diagnostic measurements, suction points, exhaust location, electrical work, sealing, and retesting belong in the professional scope.

Worked example

For 1 system at standard quality and national labor rates, the model applies the latest verified index deltas before adding permits and disposal.

Typical: $1,791

This static example is present before JavaScript loads; recalculate above for your project.

Visible questions, direct answers

What does this radon mitigation cost include?

The estimate separates materials, labor, permit, and disposal using the quantities shown. It excludes financing, hidden damage, and optional work not selected.

How does the ZIP adjustment work?

ZIP is matched to a metro when available; otherwise a state wage factor is used. Only labor changes. Materials remain tied to national price indices.

Is this a contractor quote?

No. It is a planning estimate. Confirm scope, code requirements, and price with licensed local contractors before committing funds.

Why is the range wider than the typical cost?

The low and high multipliers capture ordinary variation in finish level, access, site conditions, and contractor availability.

How current is the estimate?

The baseline is dated 2026-01-01. Index observations and their latest periods are displayed with every result.

Can I use the result for a budget?

Use it as an early planning range and include contingency. A site-specific quote remains necessary for a committed budget.

Related tools

Mold Remediation Cost Asbestos Removal Cost