Kitchens, bathrooms, additions, basements, counters, and insulation. Compare every current national default, unit cost, range, and primary driver before opening a calculator.
This span compares different project types and default quantities. It is not the cost of completing every project in the category.
| Calculator | Typical cost | Planning range | Unit cost | Primary cost driver |
|---|---|---|---|---|
| Spray Foam Insulation Cost | $4,221 | $3,165–$5,698 | $3 / sq ft | Room or project size |
| Home Addition Cost | $97,449 | $68,214–$156,893 | $244 / sq ft | Room or project size |
| Kitchen Remodel Cost | $33,550 | $23,485–$54,016 | $33,550 / project | Room or project size |
| Bathroom Remodel Cost | $16,651 | $11,656–$26,808 | $16,651 / project | Room or project size |
| Insulation Cost | $3,106 | $2,330–$4,193 | $2 / sq ft | Room or project size |
| Countertop Cost | $4,015 | $3,011–$5,421 | $100 / sq ft | Room or project size |
| Basement Finishing Cost | $47,613 | $33,329–$76,658 | $60 / sq ft | Room or project size |
| Insulation R-Value | $1,175 | $1,175–$1,175 | $1 / sq ft | Room or project size |
| Foundation Repair Cost | $13,388 | $8,702–$21,421 | $335 / linear ft | Repair method and affected length |
| House Leveling Cost | $16,863 | $10,961–$26,981 | $16,863 / project | Foundation type and total movement |
| Structural Beam Replacement Cost | $12,859 | $8,358–$20,574 | $643 / linear ft | Beam span and required capacity |
| Load-Bearing Wall Removal Cost | $14,108 | $9,170–$22,573 | $1,176 / linear ft | Opening length and supported loads |
| Crawl-Space Structural Repair Cost | $18,660 | $12,129–$29,855 | $23 / sq ft | Affected floor area and damage |
| Hardwood Flooring Installation Cost | $10,582 | $7,937–$14,286 | $13 / sq ft | Floor area and wood species |
| Hardwood Floor Refinishing Cost | $4,242 | $3,182–$5,727 | $5 / sq ft | Floor area and existing finish |
| LVP Flooring Cost | $5,796 | $4,347–$7,825 | $7 / sq ft | Floor area and plank quality |
| Tile Flooring Cost | $4,810 | $3,607–$6,493 | $19 / sq ft | Floor area and tile format |
| Carpet Installation Cost | $6,015 | $4,511–$8,121 | $6 / sq ft | Floor area and carpet grade |
| Drywall Installation Cost | $4,116 | $3,087–$5,557 | $3 / sq ft | Wall and ceiling surface area |
| Interior Painting Cost | $3,909 | $2,932–$5,277 | $2 / sq ft of surface | Painted wall and ceiling area |
| Basement Waterproofing Cost | $18,090 | $11,759–$28,944 | $151 / linear ft | Interior or exterior system |
| Crawl-Space Encapsulation Cost | $6,530 | $4,897–$8,815 | $7 / sq ft | Crawl-space floor and wall area |
| Interior Door Installation Cost | $2,726 | $2,044–$3,679 | $681 / door | Door count and slab or prehung type |
| Garage Conversion Cost | $58,048 | $37,731–$92,877 | $129 / sq ft | Converted floor area and intended use |
| Built-In Cabinets Cost | $10,475 | $6,809–$16,760 | $873 / linear ft | Cabinet length and depth |
| Closet System Cost | $5,028 | $3,771–$6,788 | $419 / linear ft | Closet wall length and height |
| Staircase Replacement Cost | $14,008 | $9,105–$22,413 | $14,008 / flight | Number of flights and geometry |
| Railing Installation Cost | $4,657 | $3,493–$6,287 | $233 / linear ft | Railing length and location |
| Fireplace Installation Cost | $11,281 | $7,333–$18,050 | $11,281 / fireplace | Fireplace type and opening size |
| Walk-In Shower Cost | $10,754 | $6,990–$17,207 | $10,754 / shower | Shower size and bathroom layout |
| Accessible Bathroom Remodel Cost | $25,799 | $16,769–$41,278 | $25,799 / bathroom | Bathroom size and mobility needs |
| Grab Bar Installation Cost | $717 | $538–$968 | $239 / grab bar | Number, length, and location of bars |
| Stair Lift Cost | $6,526 | $4,242–$10,442 | $6,526 / flight | Straight or curved staircase |
| Mold Remediation Cost | $3,452 | $2,244–$5,524 | $35 / sq ft | Affected area and material type |
| Asbestos Removal Cost | $12,853 | $8,354–$20,564 | $26 / sq ft | Confirmed material and removal area |
The current national default scenarios in this category run from $538 to $156,893. The middle modeled typical is $10,475. Each project uses a different quantity and scope, so compare the unit-cost column before using the category span.
This hub links to 35 calculators generated from the shared baseline store. 35 publish cost breakdowns; formula-only tools are labeled separately.
No. ZIP matching changes the labor component only through the available metro or state wage factor. Material escalation remains tied to the published national index series.
No. They are deterministic planning estimates. A local proposal should define quantities, materials, labor scope, permits, removal, disposal, and exclusions.