Exterior cost calculator

Concrete Driveway Cost

For a 600 sq ft concrete driveway, this model prices the concrete scope separately: placed material, concrete-trade labor, permit allowance, and removal or disposal. Adjust the slab area and finish level to compare the visible arithmetic before requesting a site-specific proposal for excavation, reinforcement, thickness, drainage, joints, and curing.

Cost model and index data updated automatically on 2026-08-15.

Estimates are generated by a deterministic data pipeline and are not individually checked by a person before publication.

Estimated project cost

Typical national cost

$6,219

$4,664 – $8,396

$10.37 per sq ft

National$6,219

ZIP adjusted$6,219

Materials$2,947 · 47%

Labor$2,547 · 41%

Permits$275 · 4%

Disposal$450 · 7%

Semantic cost breakdown
Component	Dollars	Share
Materials	$2,947	47.4%
Labor	$2,547	41.0%
Permits	$275	4.4%
Disposal	$450	7.2%

National labor multiplier: 1.000×. Enter a ZIP to match a metro or state wage factor.

Calculation record

Baseline date2026-01-01

Baseline provenancemodeled estimate, not directly sourced

Material indexWPUIP2300001 · 6.78%

Labor indexCES2000000003 · 2.29%

Data statusCost model and index data updated automatically on 2026-08-15.

material = baseline material rate × quantity × index change × quality
labor = baseline labor rate × quantity × index change × ZIP wage multiplier
subtotal = material + labor + permit + disposal

Sources used for this estimate

U.S. Bureau of Labor Statistics: May 2025 OEWSRetrieved 2026-08-14 · United States
U.S. Census Bureau: Value of Construction Put in PlaceRetrieved 2026-08-14 · United States

Every baseline number and its provenance

Numeric inputs used by the default model
Input	Published value	Source or derivation
Default quantity	600 sq ft	`hct-default-scenario-v1` User-editable starting quantity selected for the static worked example.
Material base rate	$4.60 / sq ft	`hct-legacy-baseline-v1` Locked base-period material input. Current material = input × quantity × verified material-index ratio × selected quality factor.
Labor base rate	$4.15 / sq ft	`hct-legacy-baseline-v1` Locked base-period labor input. Current labor = input × quantity × verified labor-index ratio × regional wage multiplier × selected quality factor.
Permit allowance	$275	`hct-legacy-baseline-v1` Locked national planning allowance added once; an applicable local fee schedule supersedes it.
Disposal base rate	$0.75 / sq ft	`hct-legacy-baseline-v1` Locked base-period removal and disposal allowance multiplied by project quantity.
Low range factor	0.75×	`hct-variance-model-v1` Disclosed low planning factor applied to the calculated subtotal.
High range factor	1.35×	`hct-variance-model-v1` Disclosed high planning factor applied to the calculated subtotal.

The public datasets above support wage selection, index movement, and plausibility validation. They do not claim to publish each exact locked legacy baseline. Compare all public baseline records.

Index escalation tracks the direction of input costs, not a local market price. Actual quotes vary with labor availability, permit requirements, site conditions, and local competition. Read the full methodology.

Embed this calculator

Add this free calculator to another site. The visible attribution inside the calculator must remain intact.

WidthStarting heightTheme

What changes the price

Project size and site access
Material or finish tier
Removal and disposal
Ground, drainage, or structural conditions
Permit rules and local labor availability

Worked example

For 600 sq ft at standard quality and national labor rates, the model applies the latest verified index deltas before adding permits and disposal.

Typical: $6,219

This static example is present before JavaScript loads; recalculate above for your project.

Visible questions, direct answers

What is included in the concrete driveway calculation?

The worksheet separates the modeled concrete material, installation labor, permit allowance, and disposal for the entered slab area. Reinforcement, excavation depth, subbase, drainage, finishes, and site access can change a contractor proposal and should be itemized.

How should I measure the driveway area?

Measure each rectangular section and multiply length by width, then add the sections. Curves and turnarounds can be divided into smaller shapes. Use the total square footage as the calculator input.

Why do slab thickness and reinforcement matter?

They change the concrete volume, placement work, and material list. This planning model uses a sourced per-square-foot baseline; a final proposal should state slab thickness, base preparation, reinforcement, joints, and concrete strength.

Does the estimate include removing an old driveway?

A disposal allowance is shown as its own line item. Actual demolition varies with the existing surface, thickness, reinforcement, hauling distance, and local tipping fees, so compare that allowance with the contractor scope.

How is local labor reflected?

A ZIP match applies the available metro or state wage factor to labor only. The material component remains tied to the national price index shown in the estimate.

Is this a concrete contractor quote?

No. It is a deterministic planning estimate with visible inputs and sources. Compare its line items with a written local proposal that defines preparation, placement, finish, drainage, cleanup, and warranty.

Related exterior calculators

Specific sizes and metro costs

These static scenarios use this calculator’s current baseline and show their computed number before JavaScript loads.

Join the HomeCostTotals early access list.

Save your email for future cost tools and updates.